|
The Murphy JDM-8 is a Canadian single-seat ultralight monoplane designed by Daryl Murphy. The type was intended to be sold as a kit for home construction by Murphy Aircraft of Chilliwack, British Columbia.〔Levy, Howard: ''Daryl Murphy's Latest'', Kitplanes, Volume 20, Number 1, January 2003, pages 10-12. Primedia Publications. ISSN 0891-1851〕〔 The designation indicates the designer's initials, J. Daryl Murphy and his eighth design.〔 ==Design and development== Work was begun on the JDM-8 design in December 1998, but the project was not a high priority and so did not fly until March 2001. The aircraft was first publicly shown at Sun 'n Fun 2000 when it was not yet complete.〔 The JDM-8 is an all-metal low-wing cantilever monoplane designed in two variants, one to meet the American FAR 103 Ultralight Vehicles regulations and one for the non-American markets particularly Canada and Europe.〔 The JDM-8 has a conventional landing gear with a tailwheel and can be powered by a Rotax engine from 20-80HP.〔 An unusual feature is the upwards folding wing for storage and transportation.〔〔 The fuselage of the JDM-8 is of semi-monocoque aluminum construction. The fuel tank is located in front of the instrument panel. The conventional main landing gear for the ultralight version is bungee suspended and includes brakes, while the main landing gear of the homebuilt version is of a sprung design. The tail wheel spring is of 4140 steel and incorporates an inline skate wheel.〔 The JDM-8 wing is constructed with an aluminum D-cell leading edge incorporating a high C-channel main spar made from 6061-T6 grade aluminum. The rear spar is a similar C-channel that is high and there is a third nose spar that is in height. The wing aft of the D-cell is covered in aircraft fabric and has a modified NACA 4415 airfoil with a drooped trailing edge. The 11 nose ribs and nine aft wing ribs are made from hydroformed aluminum. The ailerons were adapted from the Murphy Rebel design and are long with a chord. The ultralight version has a greater wingspan to lower its stall speed to below the US ultralight category limit of . With the wings folded the homebuilt version is high and the ultralight version with its longer wings is high.〔 The horizontal tailplane is in span to allow legal road transportation on a trailer as most jurisdictions limit trailers to . The ultralight version has an ultimate load limit of +5/-2.7 g and an operational limit of +3.8/-1.8g, while the homebuilt version has an ultimate limit of +5.7/-5.7g and an operational limit of +3.8/-3.8 g.〔 The kit supplied for the JDM-8 was intended to include the parts to make both versions and the manufacturer claimed a construction time from the kit of 800 hours.〔Downey, Julia: ''2002 Kit Aircraft Directory'', Kitplanes, Volume 18, Number 12, December 2001, page 55. Kitplanes Acquisition Company. ISSN 0891-1851〕 The completed prototype JDM-8 was displayed at Sun 'n Fun in April 2004, but due to the introduction in the US of the light-sport aircraft category at the same time, no orders were forthcoming and by 2008 the aircraft was no longer listed as being available by Patterson AeroSales, the manufacturer's sole sales agent. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Murphy JDM-8」の詳細全文を読む スポンサード リンク
|